2000 Meters Wide Voltage DC12V 24V 36V 48V DC Water Pump Motor Electric Light Wireless Remote Control Switch

Package Include 1* Receiver 1* Remote Control (with battery, If you need extra remote control , please tell us. ) Parameters: Working voltage: DC12V-48V channel: 1 channel Working frequency: 315MHZ Receive sensitivity: >-114dB Control Modes: Toggle/ Momentary / Latch Coding type: learning code Maximum Working Current: 30A / each channel Operating Temperature: -20 ° C to +70 ° C Working Range(actual Test distance: 2360M without obstacles in open space) The maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be interfered by other wireless signals. Therefore, the actual distance may not reach this maximum working distance. Control mode Description Toggle (1 button on / same button off) Latch (1 button on / other button off) Momentary (Press and hold -> On; Release -> Off) Set the different control modes: Toggle: Jumper on "T-PIN" + Middle PIN Momentary: Jumper on "M-PIN" + Middle PIN Latch: without jumper Learn method: Turn on the power, Receiver light will light for 3 seconds, After it is extinguished, press the learning button briefly. The indicator light is on. Press the remote control button immediately. The indicator light will turn off. Learn success Clear code:Turn on the power, Receiver light will light for 3 seconds, After light extinguishing, press and hold the learning button of the receiver. The indicator light is on. After 8 seconds, the indicator light flashes three times and goes out. The clear code is successful.

• Application: Pumps, Mud Pumps, Motors, Lamps, Fans, Fans, Insecticide Machines, Sprayers, Car Washers, Bells, etc. Various types of electrical equipment (for home use, power up to 3,000 watts Electrical appliances).
• Wireless control, easy to install. The wireless receiving controller, with high confidentiality, stable performance, low power consumption characteristic, jump line or dial the code switch coding.
• Wireless RF signal can pass through walls, floors, doors or windows. You can use two or more units in the same place. You can turn on/ off the receiver with transmitter (remote control) from any place within a reliable distance.
• Wide voltage design: LM2596HVS switching power supply chip is used to ensure long-term stable operation of DC DC12V-48V. High-power output: Use"Songle" 30A relay, control 180W when load power control 12V, 360W when control 24V, 500W when control 36V, 700W when control 48V.
• High sensitivity:RXB8 module, sensitivity -114dBm, sensitivity and anti-jamming capability are far beyond super-renewable and ordinary superheterodyne modules on the supermarket, and the remote control distance is farther and more stable.