AFDD-32 Arc Fault Detecion Device Circuit Breaker Interrupte Overload Short Circuit Protection AFDD+MCB 32A 6KA 1P+N 1Pcs (Size : C Curve, Color : 25A)

Arc Fault Circuit BreakersGeneral1). Rated voltage (Ue) : AC230V2). Rated frequency: 50HZ20%3). Rated insulation voltage (Ui) : 400V4). Rated impulse withstand voltage(Uimp): 4KV5). Rated current (In) : 6A, 10A, 16A, 20A, 25A, 32 A6). Magnetic tripping type: B-Curve, C-Curve7). Rated service short circuit capacity (lcs) : 6KA8). Rated short circuit capacity (lcn) : 6KATest Button Indicator Status:Normal-Green Indicating LightFault-Yellow Indicating LightInstruction: When installing this product, disconnect the upper stream power supply, and then connect the LINE and LOAD as per following steps:1. Turn on upper stream power supply, switch on the AFDD-32, the green indicating light flashes at time interval 0.6s and the product starts normal service.2. Switch on the product, connect load, press test button, the product trips, the green indicating light turns off and the yellow indicating light flashes once and goes off, which means product is at normal service.3. During normal operation of a load, if producttrips both green and yellow indicating light turns off, then first disconnect load and then switch the product handle to ON position. If the yellow indicating light flashes for 5-6 times and then turns off, last trip must have been caused by arc fault. If the yellow indicating light does not flash, last trip must have been resulted from overload or short circuit.4. Confirmation about arc fault happened to the down stream circuit. After sequence 3 is performed, switch on GDDF -32, connect again the load to the product and try to operate the load. If the yellow indicating light flashes once, the product trips and circuit gets disconnected, then arc fault must have occurred. Professional electrician is requested to investigate and correct the protected circuit.

• Arc Fault Circuit Breakers