LAFVIN POE HAT for Raspberry Pi 5/4B/3B+, IEEE 802.3af/at Compliant, 5V 4.5A & 12V 2A Dual Output, PoE Ethernet Power Supply Expansion Board with GPIO Header & Installation Kit

LAFVIN POE HAT is an Ethernet power-supply expansion board fully compatible with Raspberry Pi 3B+/4B/5. Compliant with IEEE 802.3af/at standards, it draws power directly from a PoE switch through a single network cable; on-board 12 V/2 A and 5 V/4.5 A independent DC outputs deliver ample power to the Raspberry Pi and peripherals. Application Scenarios: Pair with any IEEE 802.3af/at PoE router or switch to supply both data and power through one cable, simplifying cable management. Specifications: PoE power input: 37 V ~ 57 V DC input Power output: GPIO header: 5 V 4.5 A (MAX); 2P header: 12 V 2 A (MAX) Dimensions: 5.9 x 3.9 inch Weight: 0.22 lb Network standard: IEEE 802.3af/at PoE Bill of Materials: 1pcs POE HAT 2pcs 2×2P PoE adapter header 4pcs M2.5×18 brass standoffs 8pcs M2.5×8 black countersunk screws 1pcs Pi5 heatsink kit 1pcsCross-head screwdriver Precautions: 1. Do not connect power to the Raspberry Pi USB-C port while using the PoE HAT—doing so may damage the board. 2. The PoE HAT works with Raspberry Pi 3B+, 4B and 5, but the official Pi 5 active cooler is compatible only with Raspberry Pi 5. 3. Keep the total continuous power below 25 W; it is recommended to reserve a 20 % margin for stability. If peripherals draw high power, use a switch that supports 802.3at and can supply at least 30 W.

• 【Wide Compatibility】 Perfectly compatible with Raspberry Pi 3B+/4B/5, enabling quick switching between different models via a 2.54mm 2×P connector socket, meeting the needs of different users.
• 【IEEE 802.3af/at Standard】Complies with IEEE 802.3af/at network standards, allowing power to be taken directly from a PoE switch with just one network cable, simplifying wiring and reducing clutter.
• 【Rich Interfaces & Sufficient Power】Retains standard 40PIN GPIO header for stacking other Raspberry Pi expansion boards; equipped with two independent DC output interfaces (12V/2A and 5V/4.5A) to provide sufficient power for Raspberry Pi and peripherals.
• 【Easy to Use & Mechanical Friendly】Simply snap on the POE HAT and plug in the 2×2P connector to work immediately without additional settings; reserved space for active heatsink and wire outlet openings on each terminal for easy wiring.
• 【Free tutorial】Online documentation and video tutorials guide you through assembly and configuration.