Pile Driver, 52CC 2 Stroke Gas Powered T-Post Driver, 1900W 6500r/min Gasoline Engine Pile Driver 800-2800BPM Impact Frequency with 3 Post Driving-head Garden Fencing Tool Machine

SpecificationMaterial: ABS, Iron, Aluminium, Alloy SteelProcess: Spray MouldingColor: Black, Red, GreyPower Source: Gasoline PoweredGasoline Type: #92Engine Type: Two-stroke, Air Cooling, Single-cylinderDisplacement: 52ccFuel Tank Capacity: 1L/0.26galImpact Frequency: 800-2800BPMFuel Type: Mixed Oil (Gasoline : 2-stroke Engine Oil = 25:1)Fuel Consumption Rate: ≤0.5L/0.1Gal/h Impact Energy: 25-45J Starter System: Hand Pull StartNoise: ≤103DBA Max. Power: 1900WMax. Speed: 6500r/minMax. Torque: 3.5N.m U-Handle Size: 37*24.5cm/14.56*9.64inProduct Length: 77cm/30.31inGross Weight: 26kg/57.3lbsNet Weight: 24kg/52.9lbsPackage Size: 73.5*42.5*32.5cm/28.9*16.7*12.8inPost Driving Head Mount Size: 55mm/2.17in(Small), 70mm/2.76in(Medium) , 100mm/3.94in(Big) Package Included1*Pile Driver1*Proportioning Pot1*Funnel1*Filter Nozzle3*Allen Keys3*Piling Cylinders1*Spark Plug Sleeve1*Wrench1*Oil Mirror Spanner1*Screwdriver1*English Manual1*Tool KitNotes1.If this product does not hammer, please check if too much lubricating oil has been added. Clean the excess oil in the cylinder and add about 20 grams of high-temperature resistant lubricating oil again.2.If the impact frequency is too high to hold by hand, it is recommended to slightly reduce the speed of the carburetor. Otherwise, please increase the impact frequency.3.If the machine does not start easily, first check the ratio of oil: gasoline: oil = 25:1, be sure to use a good two-stroke oil.4.Please read the instructions carefully before use and pay attention to the safety matters contained therein.5.Please keep this product out of the reach of children.6.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you don't mind before you order.

• 【High efficiency】The powerful 52cc 2-stroke engine (1900W) delivers up to 25-45J of impact energy and up to 800-2800bpm of impact frequency for efficient piling, saving you a lot of time and energy. The 3 post-driving heads (2.17in, 2.76in,3.94in) make this an ideal choice for T-Posts, Y-Posts, and ground rods.
• 【Stable performance】The t post driver has High-quality blended oil allows the machine to burn fully during operation, with a fuel consumption rate of only 0.1gal/h. Multiple cooling holes on the body provide good heat dissipation, maintaining stable performance for a long time. A two-stroke engine is not prone to cylinder pulling or stalling even after prolonged operation, allowing you to use it with confidence.
• 【Build to last】The gas powered t post drivert is mainly made of high-quality ABS, iron, aluminum, and alloy steel, combined with a spraying molding process, which is resistant to abrasion, scratches, and impacts, and not easy to deform, so you can use it for a long time.
• 【Translucent fuel tank】This gas powered t post driver 52cc has a large capacity fuel tank of 0.26 gallons. Its translucent design makes it easy for you to check the fuel usage at any time, bringing you a more secure feeling. The socket with high hardness and thread design can be quickly replaced according to the size of the pile, and the deep thread can ensure firm fixation.
• 【Simple operation】 When you are using the pile driver, you just need to pull the starter quickly and coherently, which is very easy to start and saves effort for you. The design of the integrated handle switch enables easy and safe starting and shutting down.