SW30-4040 RO Membrane by FilmTec
Product details
| Management number | 210999480 | Release Date | 2026/04/04 | List Price | $36.00 | Model Number | 210999480 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
The DOW FILMTEC SW30-4040 reverse osmosis membrane boasts one of the highest flow rates, catering to the water needs of both sea-based and land-based watermakers. It can operate at lower pressures, reducing pump size, operational costs, and overall expenses. These membranes are frequently used in on-board watermakers to produce drinking water from brackish or ocean water for boats, yachts, and cruise ships. For detailed specifications, download the data sheet: FilmTec_SW30_product_datasheet_pdf. The SW30-4040 model features a flow rate of 1,900 gpd (7.4 m/d), an applied pressure of 800 psig (55 bar), and a stabilized salt rejection rate of 99.4%. It has a hard shell fiberglass exterior, an active membrane surface area of 80 sq. ft., and a polyamide thin-film composite membrane type. The permeate flow and salt rejection are based on a 32,000 ppm NaCl feed stream at 77°F, 8% recovery, and 800 psig. The operating limits include a maximum operating temperature of 113°F (45°C), a maximum operating pressure of 1,000 psig (69 bar), and a maximum pressure drop of 15 psig (1 bar). It can handle a maximum feed flow rate of 6 gpm (1.4m/h) and has a pH range of 2-11 for continuous operation, with a short-term cleaning pH range of 1-13. It has a maximum feed silt density index of SDI 5 and a free chlorine tolerance. Please note that the maximum temperature for continuous operation above pH 10 is 95°F, and oxidation damage is not covered under warranty. For further assistance, visit our FAQ page or contact us.
- High Flow Rate & Cost-Efficient RO Membrane: Ideal for sea and land watermakers, this FilmTec SW30-4040 membrane offers one of the highest flow rates and can operate at lower pressures to reduce pump size and expenses
- Download Specifications: Get detailed information in the FilmTec SW30 product datasheet
- Permeate Flow & Salt Rejection: Based on 32,000 ppm NaCl feed stream, 77°F, 8% recovery, 800 psig
- Operating Temperature & Chemical Exposure: Maintain continuous operation below 95°F at pH above 10. Avoid free chlorine and other oxidizing agents to prevent membrane failure
- Need Assistance? Visit our FAQ or contact us for further information
| Brand Name | FilmTec |
|---|---|
| Material Type | Resin |
| Product Benefits | Removes salt and impurities from seawater or brackish water, providing a high flow rate of clean water while being energy-efficient. |
Bestseller ranking
Water Purification System Accessories
Correction of product information
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form