WEN JT630H 10-Amp 6-Inch Spiral Benchtop Jointer & 6502T 4.3-Amp 4 x 36 in. Belt and 6 in. Disc Sander with Cast Iron Base

WEN JT630H 10-Amp 6-Inch Spiral Benchtop JointerRemember when you had a perfectly square jointer to flatten out your boards and workpieces? Maximize precision with the WEN 6-Inch Benchtop Jointer. Our spiral cutterhead utilizes 12 staggered HSS blades to provide a perfect finish to hard and soft woods alike, while the powerful 10-amp motor rotates the cutterhead up to 12,000 times per minute. Adjust the infeed table to remove 0 to 1/8-inch of material with each pass, with a reliable depth-of-cut scale for maximum accuracy. The spacious table measures in at 30 by 6 inches. Bevel the fence up to 45 degrees to create angled cuts along the faces of your boards. The spring-loaded blade guard helps protect against accidental injury, only exposing a limited section of the cutterhead during jointing operation. This package also includes two push blocks for safer jointing and an onboard dust port for minimal cleanup. Compatible with the WEN BP510H Replacement Spiral Blades. And, because it's a WEN product. a stocked inventory of replacement parts, and a friendly customer help line, all to make sure you remember WEN.WEN 6502T 4.3-Amp 4 x 36 in. Belt and 6 in. Disc Sander with Cast Iron BaseRemember when you needed a versatile and reliable sander? The WEN Belt Disc Sander easily sands, smooths and removes all of the jagged edges and splinters on your wood and lumber. With a 4.3 amp 1/2 HP motor, users should anticipate enough power to prevent this machine from bogging down under a large load. Changing the spacious 4-inch-by-36-inch belt is a breeze, so you’ll have the power to switch and replace sand paper grits as needed without wasting any time. The belt also tilts anywhere from 0 to 90 degrees to accommodate the needs of your particular workpiece while the heavy cast-iron base prevents vibrations. With all of this in addition to the 6-inch side disc, you’ll have the capacity to sand whatever your heart desires. The sanding disc is accompanied by a sturdy cast-aluminum work table. Included with the belt disc sander is a miter gauge for steady sanding on angled edges, a stop bar for safety and control, and a 2.25 inch dust port to connect a dust extractor. And because this is a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled experienced technicians, and a helpful customer service line all to make sure that you remember WEN.

• Product 1: Spiral cutterhead system utilizes 12 staggered HSS blades for an ultra fine finish
• Product 1: Features a spacious 30-by-6-inch table
• Product 1: Remove 0 to 1/8 of an inch of material with each pass
• Product 1: Adjustable 19-3/4 by 4-1/4-inch fence bevels up to 45 degrees
• Product 2: Two-in-one sanding machine includes both a 4-by-36 inch belt and a 6-by-6 inch disc
• Product 2: Belt tilts anywhere from 0 to 90 degrees
• Product 2: Sturdy cast iron base prevents any heavy vibrations
• Product 2: 4.3 Amp motor provides up to 3600 RPM